Data Sheets
Our standard line of adhesive tape products
DATA SHEETS
Downloads
On this page, you’ll find an extensive collection of data sheets for our standard adhesive tape products. We use only high-quality raw materials, primarily from major international companies such as Qnity (formerly DuPont), Mitsubishi, BASF, and Henkel. If you cannot find a data sheet here, please contact our customer service representatives directly.
The nomenclature for our technical adhesive tapes is based on the backing materials, which usually also represent the primary function (electrical insulation, mechanical strength, marking, etc.).
CMC Model Designations – Base Film:
- CMC 10xxx/12xxx=Polyester
- CMC 61xxx=PEN
- CMC 65xxx=Nomex
- CMC 70xxx=Kapton
- CMC 75xxx=PTFE
- CMC 90xxx=Aluminum foil
- CMC 91xxx=Copper foil
CMC 1xxxx
CMC 5xxxx
–
CMC 6xxxx
CMC 7xxxx
CMC 8xxxx
CMC 9xxxx
MP
| Deutsch |
English |
| MP1519-009A | MP1519-009A |
There may be cases where none of the standard solutions are suitable for certain applications. Since we at CMC Klebetechnik manufacture the adhesive tapes ourselves, modifications can be made easily. In many cases, the adhesive thickness can be varied between approximately 10 µm and approximately 70 µm. Different adhesives can also be applied to a specific substrate (e.g., Kapton® polyimide film with polysiloxane adhesive, acrylate adhesive, or a heat-activated adhesive).
In general, nearly all adhesive tapes can be cut to widths ranging from 3 mm to 500 mm. The increment is 1/10 mm, with an accuracy of ±3/10 mm. For special applications, adhesive tapes can be supplied in widths ranging from 0.8 mm to 1,500 mm.
If you cannot find a suitable solution for your application in our standard adhesive tape product line—even with modifications—we can also develop custom solutions for orders of approximately 1,000 m² or more—please contact us!