Kapton®
Polyimide Films / Polyimide Adhesive Tapes from CMC Klebetechnik
KAPTON®
For technical adhesive tapes
Kapton® polyimide film is one of the highest-quality, high-performance films available and has been used for over 40 years to meet extreme technical requirements. It offers maximum temperature resistance, very high electrical breakdown strength, chemical resistance, and mechanical stability – even under extreme conditions.
CMC Klebetechnik processes Kapton® into adhesive tapes, laminates, die-cut parts, and rolls that are used in electronics, battery technology, aerospace, mechanical engineering, and many other industries.
BENEFITS
Kapton® Polyimide films

Kapton® Polyimide films
CMC Klebetechnik offers Kapton® as a non-adhesive film as well as single- and double-sided high-temperature adhesive tapes for demanding technical applications.
Extremely temperature-resistant
UL94 V0
Excellent electrical dielectric strength
Highly chemical-resistant & mechanically stable
Low shrinkage
Kapton® adhesive tapes provide a reliable, high-temperature-resistant bond and are specifically designed for demanding technical processes. They adhere securely to a wide variety of surfaces, resist aggressive chemicals as well as impregnating and potting compounds, and maintain their mechanical stability even under extreme conditions.
In electronics manufacturing in particular, they stand out for their ability to be removed without leaving any residue, even during reflow soldering processes. This makes them ideal for applications such as solder masks, battery insulation, high-temperature bonding, cryogenic processes, and many other industrial applications where reliability and temperature resistance are critical.
CMC 70025
Kapton® HN
Non-sticky
Film thickness: 0.025 mm
Breakdown voltage: 7,300 V rms
CMC 70050
Kapton® HN
Non-sticky
Film thickness: 0.050 mm
Breakdown voltage: 9,500 V rms
CMC 70075
Kapton® HN
Non sticky
Film thickness: 0,075 mm
Breakdown voltage: 11.400 Veff
CMC 70125
Kapton® HN
Non sticky
Film thickness: 0,125 mm
Breakdown voltage: ≥12.000 Veff
CMC 70100
Kapton® HN
Single-sided adhesive
Adhesive: Acrylat
UL 510
UL Listing
Film thickness: 0,025 mm
Total thickness: 0,055 mm
Breakdown voltage: ≥6.000 Veff
CMC 70105
Kapton® HN
Single-sided adhesive
Adhesive: Acrylat
UL 510
UL Listing
Film thickness: 0,050 mm
Total thickness: 0,080 mm
Breakdown voltage: ≥9.000 Veff
CMC 70106
Kapton® HN
Single-sided adhesive
Adhesive: Acrylat
Film thickness: 0,025 mm
Total thickness: 0,055 mm
Breakdown voltage: ≥6.000 Veff
CMC 70107
Kapton® HN
Single-sided adhesive
Adhesive: Acrylat
Film thickness: 0,050 mm
Total thickness: 0,080 mm
Breakdown voltage: ≥9.000 Veff
CMC 70110
Single-sided adhesive
Adhesive: Polysiloxan
UL 510
UL Listing
Film thickness: 0,025 mm
Total thickness: 0,065 mm
Breakdown voltage: ≥6.000 Veff
CMC 70115
Kapton® HN
Single-sided adhesive
Adhesive: Polysiloxan
Film thickness: 0,050 mm
Total thickness: 0,100 mm
Breakdown voltage: 12.000 Veff
CMC 70791
Kapton® MT
Single-sided adhesive
Adhesive: Acrylat
Film thickness: 0,050 mm
Total thickness: 0,078 mm
Breakdown voltage: ≥7.000 Veff
CMC 70849
Kapton® HN
Single-sided adhesive
Adhesive: Polysiloxan
Film thickness: 0,125 mm
Total thickness: 0,160 mm
Breakdown voltage: ≥12.000 Veff
CMC 70864
Kapton® HN
Single-sided adhesive
Adhesive: Acrylat
Film thickness: 0,025 mm
Total thickness: 0,060 mm
Breakdown voltage: ≥6.000 Veff
CMC 70968
Kapton® HN
Single-sided adhesive
Adhesive: Polysiloxan
Film thickness: 0,075 mm
Total thickness: 0,110 mm
Breakdown voltage: ≥10.000 Veff
CMC 70097
Kapton® HN
Double-sided adhesive
Adhesive: Acrylat
Film thickness: 0,025 mm
Total thickness: 0,060 mm
Breakdown voltage: ≥6.000 Veff
CMC 70752
Kapton® HN
Double-sided adhesive
Adhesive: Polysiloxan
Film thickness: 0,025 mm
Total thickness: 0,140 mm
Breakdown voltage: 7.000 Veff
CMC 70821
Kapton® MT
Double-sided adhesive
Adhesive: Acrylat / Copolymer wax
Film thickness: 0,050 mm
Total thickness: 0,090 mm
Breakdown voltage: ≥7.000 Veff
CMC 70880
Kapton® MT
Double-sided adhesive
Adhesive: Acrylat
Film thickness: 0,050 mm
Total thickness: 0,140 mm
Breakdown voltage: ≥7.000 Veff
KAPTON®
Variants
Kapton® HN
Standard Version.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® MT
Thermally conductive.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® CRC
Improved durability.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® 150FCRC019
Corona resistant, cti=1.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® 120FN616
Cti=1, hot-melt adhesive.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® B
Opaque black.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® FN
Cti=1, hot-melt adhesive.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® FMT
Cti=1, thermally conductive.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Kapton® EN
Good adhesion, very thin films.
more Info
Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.
Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.
Custom Solutions & Custom-Made Products
If no standard product meets your needs, we’ll work with you to develop a custom solution:
• Custom adhesive tapes
• Die-cut parts based on drawings
• Special material combinations
• Custom widths and shapes
BENEFITS
Why Choose CMC Adhesive Technology?
CMC Klebetechnik stands for diversity, precision, and true development expertise. With over 200 product types, the company offers solutions for virtually any technical application. Thanks to in-house development, it creates custom adhesive tapes and functional films that are precisely tailored to specific requirements. Precise manufacturing enables roll widths ranging from 0.8 mm to 1,000 mm - perfect for mass production, custom formats, and demanding industries.
With decades of experience in electrical engineering, the automotive industry, mechanical engineering, energy, and many other sectors, CMC Klebetechnik delivers reliable results of the highest standard. And it’s all Made in Germany - for quality, technical precision, and maximum reliability.
Over 60 years of experience
Cross-Industry Expertise
In-house coating facilities
Rapid Sample & Prototype Production
Sustainable, Responsible Production
Made in Germany
BLOG
Our expertise. Your benefit.
Stiffeners from CMC
Adhesive Reinforcements for FPCs
Die-cut Parts & Laminates
for high-voltage applications
Stranded Wires in E-Mobility
and how adhesive tapes improve their insulation
FAQ
Questions & Answers
What is Kapton®?
Kapton® is a high-performance polyimide film that easily withstands extreme temperatures, heavy mechanical stress, and aggressive chemicals. It has been used for decades in electronics, aerospace, battery technology, and many industrial applications.
What is Kapton®'s temperature resistance?
Kapton® remains stable over an exceptionally wide temperature range: from –268 °C to +240 °C under continuous use, and even up to 400 °C for short periods. This makes it one of the most heat-resistant engineering films available.
Why is Kapton® so well-suited for technical adhesive tapes?
Kapton® offers a combination of high-temperature resistance, electrical insulation, chemical resistance, and mechanical stability. When combined with heat-resistant silicone adhesives, it produces adhesive tapes that can easily withstand even reflow soldering processes or extremely low temperatures.
What Kapton® products does CMC Klebetechnik offer?
CMC supplies Kapton® as a non-adhesive film, as single-sided high-temperature adhesive tapes, and as double-sided adhesive variants for lamination and fastening.
Can Kapton® adhesive tapes be removed without leaving any residue?
Yes. Kapton® tapes with silicone adhesive can be removed cleanly and without leaving any residue after high-temperature processes such as reflow soldering—an important advantage in electronics manufacturing.
What are Kapton® tapes typically used for?
Typical applications include:
• Solder masks
• Battery insulation (e.g., lithium-ion cells)
• High-temperature bonding
• Cryogenic processes
• Electronics manufacturing
• Aerospace
What types of Kapton® are available?
The most important types include, among others:
• Kapton® HN – standard type for general-purpose applications
• Kapton® MT – thermally conductive and electrically insulating
• Kapton® BCLY – dyed yellow for high-temperature labels
• Kapton® FN / XP – FEP- or PFA-coated for wire insulation
• Kapton® RS – electrically conductive
• Kapton® HPP-ST – mechanically reinforced
Are there Kapton® variants for thermal management?
Yes. Kapton® MT, in particular, is thermally conductive and electrically insulating at the same time—ideal for thermal management in electronic assemblies.


