06233 872 300 info@cmc.de

Kapton®

Polyimide Films / Polyimide Adhesive Tapes from CMC Klebetechnik

KAPTON®

For technical adhesive tapes

Kapton® polyimide film is one of the highest-quality, high-performance films available and has been used for over 40 years to meet extreme technical requirements. It offers maximum temperature resistance, very high electrical breakdown strength, chemical resistance, and mechanical stability – even under extreme conditions.

CMC Klebetechnik processes Kapton® into adhesive tapes, laminates, die-cut parts, and rolls that are used in electronics, battery technology, aerospace, mechanical engineering, and many other industries.

BENEFITS

Kapton® Polyimide films

Kapton® Polyimide films

CMC Klebetechnik offers Kapton® as a non-adhesive film as well as single- and double-sided high-temperature adhesive tapes for demanding technical applications.

Extremely temperature-resistant

UL94 V0

Excellent electrical dielectric strength

Highly chemical-resistant & mechanically stable

Low shrinkage

Kapton® adhesive tapes provide a reliable, high-temperature-resistant bond and are specifically designed for demanding technical processes. They adhere securely to a wide variety of surfaces, resist aggressive chemicals as well as impregnating and potting compounds, and maintain their mechanical stability even under extreme conditions.

In electronics manufacturing in particular, they stand out for their ability to be removed without leaving any residue, even during reflow soldering processes. This makes them ideal for applications such as solder masks, battery insulation, high-temperature bonding, cryogenic processes, and many other industrial applications where reliability and temperature resistance are critical.

CMC 70025

Kapton® HN

Non-sticky

Film thickness: 0.025 mm

Breakdown voltage: 7,300 V rms

CMC 70050

Kapton® HN

Non-sticky

Film thickness: 0.050 mm

Breakdown voltage: 9,500 V rms

CMC 70075

Kapton® HN

Non sticky

Film thickness: 0,075 mm

 Breakdown voltage: 11.400 Veff

CMC 70125

Kapton® HN

Non sticky

Film thickness: 0,125 mm

 Breakdown voltage: ≥12.000 Veff

CMC 70100

Kapton® HN

Single-sided adhesive

Adhesive: Acrylat
UL 510
UL Listing

Film thickness: 0,025 mm
Total thickness: 0,055 mm

 Breakdown voltage: ≥6.000 Veff

CMC 70105

Kapton® HN

Single-sided adhesive

Adhesive: Acrylat
UL 510
UL Listing

Film thickness: 0,050 mm
Total thickness: 0,080 mm

 Breakdown voltage: ≥9.000 Veff

CMC 70106

Kapton® HN

Single-sided adhesive

Adhesive: Acrylat

Film thickness: 0,025 mm
Total thickness: 0,055 mm

 Breakdown voltage: ≥6.000 Veff

CMC 70107

Kapton® HN

Single-sided adhesive

Adhesive: Acrylat

Film thickness: 0,050 mm
Total thickness: 0,080 mm

Breakdown voltage: ≥9.000 Veff

CMC 70110

Single-sided adhesive

Adhesive: Polysiloxan

UL 510
UL Listing

Film thickness: 0,025 mm
Total thickness: 0,065 mm

 Breakdown voltage: ≥6.000 Veff

CMC 70115

Kapton® HN

Single-sided adhesive

Adhesive: Polysiloxan

Film thickness: 0,050 mm
Total thickness: 0,100 mm

Breakdown voltage: 12.000 Veff

CMC 70791

Kapton® MT

Single-sided adhesive

Adhesive: Acrylat

Film thickness: 0,050 mm
Total thickness: 0,078 mm

Breakdown voltage: ≥7.000 Veff

CMC 70849

Kapton® HN

Single-sided adhesive

Adhesive: Polysiloxan

Film thickness: 0,125 mm
Total thickness: 0,160 mm

Breakdown voltage: ≥12.000 Veff

CMC 70864

Kapton® HN

Single-sided adhesive

Adhesive: Acrylat

Film thickness: 0,025 mm
Total thickness: 0,060 mm

Breakdown voltage: ≥6.000 Veff

CMC 70968

Kapton® HN

Single-sided adhesive

Adhesive: Polysiloxan

Film thickness: 0,075 mm
Total thickness: 0,110 mm

Breakdown voltage: ≥10.000 Veff

CMC 70097

Kapton® HN

Double-sided adhesive

Adhesive: Acrylat

Film thickness: 0,025 mm
Total thickness: 0,060 mm

Breakdown voltage: ≥6.000 Veff

CMC 70752

Kapton® HN

Double-sided adhesive

Adhesive: Polysiloxan 

Film thickness: 0,025 mm
Total thickness: 0,140 mm

Breakdown voltage: 7.000 Veff

CMC 70821

Kapton® MT

Double-sided adhesive

Adhesive: Acrylat / Copolymer wax

Film thickness: 0,050 mm
Total thickness: 0,090 mm

Breakdown voltage: ≥7.000 Veff

CMC 70880

Kapton® MT

Double-sided adhesive

Adhesive: Acrylat 

Film thickness: 0,050 mm
Total thickness: 0,140 mm

Breakdown voltage: ≥7.000 Veff

KAPTON®

Variants

Kapton® HN

Standard Version.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® MT

Thermally conductive.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® CRC

Improved durability.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® 150FCRC019

Corona resistant, cti=1.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® 120FN616

Cti=1, hot-melt adhesive.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® B

Opaque black.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® FN

Cti=1, hot-melt adhesive.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® FMT

Cti=1, thermally conductive.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Kapton® EN

Good adhesion, very thin films.

more Info

Die Standardversion der Polyimid-Folie von Qnity (ehem. DuPont) ist Kapton® HN (UL E39505) – (Thermal Conductivity ~0,12 W/mK), hergestellt aus einer Polymerisation von Aromatischem Dianhydride mit Aromatischem Diamin. Die Folie ist in den Stärken 1 mil, 1,5 mil, 2 mil, 3 mil und 5 mil erhältlich (entspricht 25µm, 36µm, 50µm, 75µm und 125µm). Der cti-Wert von Kapton® HN ist 4 (100-175 V), kann jedoch auf 1 verbessert werden, siehe z.B. Kapton® FN und Kapton® FMT.

Wegen der geringen Wärmeleitfähigkeit von Kapton HN (0,12 W/m*K) auch als hoch belastbare Wärmeisolation einsetzbar.

Custom Solutions & Custom-Made Products

If no standard product meets your needs, we’ll work with you to develop a custom solution:

• Custom adhesive tapes
• Die-cut parts based on drawings
• Special material combinations
• Custom widths and shapes

    Request a Custom Solution Now

    BENEFITS

    Why Choose CMC Adhesive Technology?

    CMC Klebetechnik stands for diversity, precision, and true development expertise. With over 200 product types, the company offers solutions for virtually any technical application. Thanks to in-house development, it creates custom adhesive tapes and functional films that are precisely tailored to specific requirements. Precise manufacturing enables roll widths ranging from 0.8 mm to 1,000 mm - perfect for mass production, custom formats, and demanding industries.
    With decades of experience in electrical engineering, the automotive industry, mechanical engineering, energy, and many other sectors, CMC Klebetechnik delivers reliable results of the highest standard. And it’s all Made in Germany - for quality, technical precision, and maximum reliability.

    Over 60 years of experience

    Cross-Industry Expertise

    In-house coating facilities

    Rapid Sample & Prototype Production

    Sustainable, Responsible Production

    Made in Germany

    FAQ

    Questions & Answers

    What is Kapton®?

    Kapton® is a high-performance polyimide film that easily withstands extreme temperatures, heavy mechanical stress, and aggressive chemicals. It has been used for decades in electronics, aerospace, battery technology, and many industrial applications.

    What is Kapton®'s temperature resistance?

    Kapton® remains stable over an exceptionally wide temperature range: from –268 °C to +240 °C under continuous use, and even up to 400 °C for short periods. This makes it one of the most heat-resistant engineering films available.

    Why is Kapton® so well-suited for technical adhesive tapes?

    Kapton® offers a combination of high-temperature resistance, electrical insulation, chemical resistance, and mechanical stability. When combined with heat-resistant silicone adhesives, it produces adhesive tapes that can easily withstand even reflow soldering processes or extremely low temperatures.

    What Kapton® products does CMC Klebetechnik offer?

    CMC supplies Kapton® as a non-adhesive film, as single-sided high-temperature adhesive tapes, and as double-sided adhesive variants for lamination and fastening.

    Can Kapton® adhesive tapes be removed without leaving any residue?

    Yes. Kapton® tapes with silicone adhesive can be removed cleanly and without leaving any residue after high-temperature processes such as reflow soldering—an important advantage in electronics manufacturing.

    What are Kapton® tapes typically used for?

    Typical applications include:
    • Solder masks
    • Battery insulation (e.g., lithium-ion cells)
    • High-temperature bonding
    • Cryogenic processes
    • Electronics manufacturing
    • Aerospace

    What types of Kapton® are available?

    The most important types include, among others:
    • Kapton® HN – standard type for general-purpose applications
    • Kapton® MT – thermally conductive and electrically insulating
    • Kapton® BCLY – dyed yellow for high-temperature labels
    • Kapton® FN / XP – FEP- or PFA-coated for wire insulation
    • Kapton® RS – electrically conductive
    • Kapton® HPP-ST – mechanically reinforced

    Are there Kapton® variants for thermal management?

    Yes. Kapton® MT, in particular, is thermally conductive and electrically insulating at the same time—ideal for thermal management in electronic assemblies.

    We're happy to help!

    Gabriele Sältzer

    Customer Service

     

    Phone: +49 6233 872 351

    Email: saeltzer@cmc.de

    Christina Araktsidou

    Customer Service

     

    Phone: +49 6233 872 321

    Email: araktsidou@cmc.de