06233 872 300 info@cmc.de

Film Coating

& Contract Coating – Efficient, Flexible, Customized

COATING

Custom-made & professional

CMC Klebetechnik has been coating films, fabrics, and nonwovens using the roll-to-roll process for decades. Our strength: custom functional and adhesive coatings that are precisely tailored to your application. With two state-of-the-art coating lines (up to 1,900 mm wide, 4–50 m/min), we can produce both high-precision specialty coatings and cost-effective mass-production runs.

Everything from a single source

 

• Development and mass production from a single source
• Coating widths up to 1,900 mm
• Solvent- and water-based systems
• Pilot testing and laboratory development
• Small and large batch sizes can be produced cost-effectively
• Cutting, die-cutting, laminating, and finishing included
• High-quality manufacturing in Germany

SERVICES

Film Coating

Our Services

We manufacture coated films both for our own products and on a contract basis.

Cost-effective production of small and large quantities

Short setup times & low start-up losses

Option to rent the equipment by the hour for experiments

Wide selection of materials and adhesives

Minimum coating volume starting at 1,000 m²; capacity in the millions of m² range

Custom coating solutions require more than just high-performance equipment. Key factors include material expertise, process know-how, and a deep understanding of the end application.

CMC supports customers from the initial concept through to stable mass production. In doing so, we translate customer requirements into suitable material combinations, coating formulations, and cost-effective manufacturing processes.  

Materials That Can Be Coated

Films
• Polyester films (Hostaphan®, Mylar®)
• Polyimide films (Kapton®)
• PTFE films (Teflon®)
• ETFE films
• PEEK films (Victrex®)
• PPS films (Torelina®)
• PEN films (Teonex®)
• PVC films
• Copper films
• Aluminum films

Other substrate materials
• Glass fabric
• Nonwovens
• Paper
• Aramid paper (Nomex®)
• Materials provided by the customer

Different Coating Systems

Adhesive Systems
• Acrylate adhesives
• Pure acrylate adhesives
• Polysiloxane adhesives
• Silicone adhesives
• Rubber adhesives
• Heat-seal adhesives
• PU adhesives
• Polyester resin systems

Functional Coatings
• Adhesive coatings
• Thermally conductive coatings
• Slip-resistant surfaces
• Insulating coatings
• Shielding coatings
• Latex systems
• Multi-component systems
• Custom formulations

Our Development Process

1. Requirements Analysis
We work together to define the technical, economic, and product-specific requirements.
Examples:
• Removable adhesive bonds
• Thermal conductivity
• Temperature resistance
• Electrical insulation
• Special surface properties

2. Material and Process Selection
Based on the requirements, suitable substrate materials, adhesives, and coating processes are selected.

3. Laboratory Development and Pilot Coating
Initial samples are produced on laboratory equipment and pilot coaters, and process parameters are developed.

4. Production Trials
The process is then scaled up to production lines under actual manufacturing conditions.

5. Mass Production and Optimization
After successful testing, mass production begins. Processes and costs are then continuously optimized.

COATING

Technical Capabilities

Using state-of-the-art roll-to-roll coating systems, CMC develops custom coating solutions for films, fabrics, nonwovens, and other web-based materials. The production lines accommodate coating widths of up to 1,900 mm and operate at speeds ranging from 0.5 to 50 m/min, depending on the application. They can handle both thin functional coatings starting at approximately 6 g/m² and high-volume applications with coating weights of up to 2,000 g/m². The company uses water-based and solvent-based coating systems, as well as 100% systems and sophisticated two-component (2K) coatings for specialized technical applications.

Various coating processes are available to ensure optimal adaptation to specific requirements. These include, among others, roller doctor blade and comma doctor blade processes, as well as strip coating for defined functional areas. Upstream corona pretreatment can improve the surface properties of many materials and ensure reliable adhesion of the coating. Continuous in-line quality monitoring also guarantees consistently high product quality throughout the entire manufacturing process.

Beyond the actual coating process, CMC offers comprehensive finishing options throughout the entire value chain. Coated materials can be directly laminated or laminated with a backing, cut to custom widths, die-cut, or divided into multiple roll formats. Depending on the application, it is also possible to cover the coating with siliconized paper or protective films. This results in ready-to-install, custom solutions that are precisely tailored to the requirements of the respective application.

Contract Coating of Films

Not every company has its own coating facilities or development capabilities. That is why CMC offers contract coating services for films, fabrics, papers, and nonwovens.

The following can be provided:
• the substrate only
• the coating formulation only
• both the substrate and the coating system
• complete development projects

Typical reasons for outsourcing:
• lack of production capacity
• lack of coating equipment
• lack of development resources
• focus on core competencies  

INFO

Applications, Certifications & More

Applications

Custom-coated materials are used, among other things, for:

• technical adhesive tapes
• thermal management
• electrical insulation
• electromagnetic shielding
• surface functionalization
• protective and barrier layers
• industrial laminate structures
• specialty applications in electronics and industry

Quality and More

CMC relies on documented and reproducible processes.

Quality Features
• In-line process monitoring
• Laboratory testing of every production batch
• Traceability
• Documented development processes

Standards and Certifications
• ISO 9001 and ISO 14001
• IMDS, RoHS, UL, IEC

Cost-Effectiveness

The cost of a coating depends in particular on:
• Material width
• Application quantity
• Coating speed
• Number of coating passes
• Substrate material
• Coating material

For a rough estimate, material- and process-related losses should be taken into account. Typical ranges for these losses are approximately 5 to 15 percent.

Custom Solutions & Custom-Made Products

If no standard product meets your needs, we’ll work with you to develop a custom solution:

• Custom adhesive tapes
• Die-cut parts based on drawings
• Special material combinations
• Custom widths and shapes

    Request a Custom Solution Now

    BENEFITS

    Why Choose CMC Adhesive Technology?

    CMC Klebetechnik stands for diversity, precision, and true development expertise. With over 200 product types, the company offers solutions for virtually any technical application. Thanks to in-house development, it creates custom adhesive tapes and functional films that are precisely tailored to specific requirements. Precise manufacturing enables roll widths ranging from 0.8 mm to 1,000 mm - perfect for mass production, custom formats, and demanding industries.
    With decades of experience in electrical engineering, the automotive industry, mechanical engineering, energy, and many other sectors, CMC Klebetechnik delivers reliable results of the highest standard. And it’s all Made in Germany - for quality, technical precision, and maximum reliability.

    Over 60 years of experience

    Cross-Industry Expertise

    In-house coating facilities

    Rapid Sample & Prototype Production

    Sustainable, Responsible Production

    Made in Germany

    FAQ

    Questions & Answers

    What does CMC Klebetechnik do in the field of film coating?

    For over 60 years, CMC has been coating films, fabrics, and nonwovens using a roll-to-roll process and offers both custom coatings and contract coating services.

    What materials can be coated?

    Materials that can be coated include, among others, polyester, polyimide, PEN, PTFE, ETFE, PPS, and PEEK films; glass fabric; nonwovens; paper; and aluminum and copper foils.

    What types of adhesive and functional systems are available?

    CMC processes acrylate, pure acrylate, silicone, polysiloxane, rubber, PU and polyester resins, two-component and 100% systems, as well as specialty compounds such as thermally conductive silicones and latex.

    How does the development process work?

    The process typically consists of three to four steps:
    1. Property Profile & Consultation
    2. Formulation Development & Coating
    3. Pilot & Sample Production
    4. Mass Production This structured process reduces failed attempts and ensures predictable costs.

    What coating widths and application weights are possible?

    The systems can handle widths of up to 1,900 mm and coating weights ranging from approximately 6 g/m² to 2,000 g/m².

    What speeds can be reached?

    Depending on the product and requirements, coating speeds range from 0.5 m/min to 50 m/min.

    Does CMC also offer strip coatings?

    Yes. Strip coatings can be applied in freely definable widths and spacings – ideal for finger-lift solutions, breathable nonwovens, or adhesive-free functional zones.

    Can the customer provide their own materials?

    Yes. Customers can provide films, adhesives, or both. It is also possible to use the equipment on an hourly basis for testing.

    What are the advantages of the Pilotcoater?

    The pilot coater enables rapid parameter adjustments, production-quality samples, and cost-effective development steps for widths up to 300 mm. All tests are monitored and documented.

    Which industries benefit from custom coatings?

    Typical applications can be found in electronics, the automotive industry, medical technology, manufacturing, energy, EMC shielding, insulation, temperature management, and many other fields.

    Why is contract coating worth it?

    Contract coating is ideal when a company lacks the necessary capacity, does not have the required equipment, or needs specialized solutions. Other coating providers also partner with CMC.

    What quality standards does CMC meet?

    CMC operates in accordance with IMDS, RoHS, UL, IEC, ISO 9001, and ISO 14001.

    CMC Klebetechnik

    Rudolf-Diesel-Straße 4
    67227 Frankenthal

    Open

    Monday through Friday
    8 a.m. – 6 p.m.

    Phone

    06233 872 300

    Email

    info@cmc.de