06233 872 300 info@cmc.de

Cutting & Contract Cutting

Precise, flexible, customized

CUTTING

Cutting Service for Roll Goods

CMC Klebetechnik offers a wide range of cutting techniques for films, papers, and nonwovens. Our state-of-the-art cutting department processes both standard materials—such as polyester, Kapton, and Nomex films – and customer-supplied products. To ensure optimal results, we recommend conducting a cutting test for customer-supplied materials.

SERVICES

Cutting

Our Services

CMC has many years of experience in processing a wide range of standard materials.  

Cutting widths from 1 mm to 1,900 mm

Manufacturing in 1/10-mm increments

Roll lengths ranging from 5 m to 2,500 m

Standard tolerance of ± 0.2 mm

Material thicknesses ranging from 0.012 mm to approximately 0.500 mm

Roll stock, sheet stock, and pre-cut blanks

Cutting Service for Custom Orders

Our cutting department is equipped with a variety of cutting technologies, allowing us to process materials optimally based on roll length, cutting width, material properties, and quantity. The materials we can process include, among others, films, papers, and nonwovens. For customer-supplied materials, we recommend conducting a cutting test in advance to ensure optimal processing.

CMC has many years of processing experience with numerous standard materials. These include, in particular: polyester films, Kapton® films, glass fabric, and Nomex® papers.

In the production and processing of web-based materials, cutting typically takes place at the end of the value chain. Often, large rolls – so-called jumbo or master rolls – from the coating process are first divided into smaller pre-cut formats. In addition, log rolls with a defined running length can be prepared. In the final processing step, these are used to produce customer-specific roll widths with high precision or pre-products for subsequent die-cutting.

Roll Cutting

– Efficient for Large Quantities

Roll cutting is the traditional method of film processing and is particularly well-suited for larger quantities and uniform roll widths. In this process, the material is unwound from a roll, guided through a rotating set of blades using the shear-cutting method, and then rewound onto new cores. The cut rolls are wound alternately onto separate shafts.
With certain materials, such as metal foils, the shear cut can cause material displacement at the cut edges. These effects can be specifically minimized by using specially adapted blade sets. This process is used in particular when large quantities of identical rolls need to be produced cost-effectively.

Trimming to Size

– Precise sheet sizes

During size-cutting, roll materials are not rewound but are cut to customer-specific sheet sizes. This marks the transition from traditional roll goods to the production of custom die-cut parts and labels.

The maximum sheet size is:
• up to 2,500 × 2,000 mm
• larger sizes available upon request
• smaller sizes available at any time
• material thicknesses up to 5 mm
Thanks to its high flexibility, sheet cutting is suitable for both one-off production and for preparing materials for downstream production processes.

Trimming

– Rapid width adjustment

During cross-cutting, log rolls that have already been prepared to specific running lengths are cut to the desired final width using a rotating blade that cuts tangentially into the material. This process allows for particularly rapid adjustments to roll widths and is therefore ideally suited for frequently changing customer requirements.

The cutting process generates material displacement and frictional heat, which can be reduced, for example, through water cooling. Despite these physical limitations, the process offers a high degree of flexibility and enables cost-effective customization of a wide variety of products.

Laminating

– Safely Combining Materials

In addition to cutting, CMC also offers the option of bonding different materials together through lamination. This process can be performed either during the formatting stage or as a standalone processing step.

Some of the laminating systems used are specifically designed for processing extremely thin films and enable the lamination of materials in the single-micrometer range starting at approximately 6 µm, depending on the material’s strength. The production of warp-free laminates requires precise process control and extensive experience.

SERVICES

Cutting

With decades of experience, state-of-the-art equipment, and extensive expertise in materials, CMC offers customized solutions for a wide variety of cutting jobs. From jumbo rolls to precise roll and sheet formats to preparation for die-cutting, customers receive all processing steps from a single source. Cutting, formatting, laminating, and die-cutting can be optimally coordinated and efficiently integrated into existing production processes.

Custom Solutions & Custom-Made Products

If no standard product meets your needs, we’ll work with you to develop a custom solution:

• Custom adhesive tapes
• Die-cut parts based on drawings
• Special material combinations
• Custom widths and shapes

    Request a Custom Solution Now

    BENEFITS

    Why Choose CMC Adhesive Technology?

    CMC Klebetechnik stands for diversity, precision, and true development expertise. With over 200 product types, the company offers solutions for virtually any technical application. Thanks to in-house development, it creates custom adhesive tapes and functional films that are precisely tailored to specific requirements. Precise manufacturing enables roll widths ranging from 0.8 mm to 1,000 mm - perfect for mass production, custom formats, and demanding industries.
    With decades of experience in electrical engineering, the automotive industry, mechanical engineering, energy, and many other sectors, CMC Klebetechnik delivers reliable results of the highest standard. And it’s all Made in Germany - for quality, technical precision, and maximum reliability.

    Over 60 years of experience

    Cross-Industry Expertise

    In-house coating facilities

    Rapid Sample & Prototype Production

    Sustainable, Responsible Production

    Made in Germany

    FAQ

    Questions & Answers

    What materials can be cut using CMC adhesive technology?

    CMC processes a wide range of web-like materials, such as papers, films, and nonwovens. The company has many years of experience with standard materials such as polyester films, Kapton® films, glass fabrics, and Nomex papers.

    What cutting techniques are used?

    Depending on the material, roll length, cutting width, and quantity, different cutting methods are used – including roll cutting, sheet cutting, and cross-cutting. Each technique is suited to specific requirements and material properties.

    What is meant by "format cutting"?

    In format cutting, roll stock is cut across the running direction to produce customer-specific sheet sizes. This process is ideal for preparing die-cut parts and labels. The maximum sheet size is 2,500 × 2,000 mm.

    What speeds can be reached?

    Depending on the product and requirements, coating speeds range from 0.5 m/min to 50 m/min.

    What is cross-cutting, and when is it used?

    In cross-cutting, log rolls are cut to the desired width using a knife that enters tangentially. This process offers a high degree of flexibility and is particularly well-suited for frequently changing customer orders.

    What cutting widths and tolerances are possible?
    • Cutting widths: 3 mm to 1,500 mm (in 0.1-mm increments)
    • Standard tolerance: ±0.2 mm
    • Roll lengths: 5 m to 2,500 m
    • Material thicknesses: 0.012 mm to approx. 0.5 mm; up to 3 mm depending on the material
    Can we process materials provided by the customer?

    Yes. Customers can provide their own films or materials. We recommend performing a test cut beforehand to ensure optimal results.

    Does CMC also offer laminating services?

    Yes. Materials can be laminated during or before cutting. The laminators used are specifically designed for very thin films in the single-micrometer range and produce warp-free laminates.

    CMC Klebetechnik

    Rudolf-Diesel-Straße 4
    67227 Frankenthal

    Open

    Monday through Friday
    8 a.m. – 6 p.m.

    Phone

    06233 872 300

    Email

    info@cmc.de