06233 872 300 info@cmc.de

Die-cut parts

for technical applications

PUNCHING

Custom Die-Cut Parts

CMC Klebetechnik manufactures custom die-cut parts from films, papers, nonwovens, fabrics, and many other materials – exactly according to your drawings, with consistent quality, and for quantities ranging from prototypes to large-scale production runs. Our state-of-the-art die-cutting processes enable complex contours, cutouts, and material combinations that are perfectly tailored to your application.

With over 30 years of experience, extensive material expertise, and a high-performance production chain, we offer you cost-effective, tailor-made solutions for demanding industrial requirements.

BENEFITS

Die-cut parts from CMC Klebetechnik

Precise, consistent quality

Fast, clean assembly processes

No waste of materials, precisely measured

Custom shapes, cutouts, folds, and adhesive surfaces

”Production

Processing of customer-supplied materials is possible

Self-adhesive and non-self-adhesive die-cut parts are manufactured according to individual customer specifications. They can be delivered as individual parts, in sheets, or on rolls. Additionally, features such as grip tabs or butterfly folds can be incorporated to facilitate further processing. CMC produces die-cut parts ranging from small, stamp-sized components up to dimensions of approximately 500 × 500 mm. Depending on the project, production volumes range from a few samples to small batches and up to approximately 10 million parts. The material thicknesses that can be processed range from about 5 µm for films to approximately 3 mm for sheet materials.

Technical Capabilities

A variety of stamping and assembly technologies are available to ensure cost-effective production for a wide range of requirements. The optimal process is selected based on the material, geometry, quantity, and quality requirements.

• Prototyping and pre-production
• Small- and large-volume production
• Rotary die-cutting for high-volume production
• Punch press for small and complex components
• Cutting plotters for flexible contours
• UV coating
• Laminating and face-lining

• Cross-Cutting and Cutting to Length
• Folding
• 3D die-cut parts
• Custom assembly
• Contract die-cutting
• Single-sided or double-sided adhesive
• Available on rolls in single-web or multi-web configurations

Strip Steel Cutting Tools

Cost-effective strip-steel cutting dies are used for many applications. In this process, a thin blade of steel is inserted into a die holder whose contour exactly matches the shape of the final stamped part. These dies are particularly well-suited for medium production runs and allow for tolerances of approximately ±0.3 mm. Production runs of up to about 200,000 parts can be manufactured cost-effectively using this method.

Full-cut tools

Solid-body tools are used for applications requiring higher precision, long tool life, or the machining of hard materials. These tools enable complex cutting geometries and 3D cuts; however, their complex design results in higher tooling costs.

Rotary Die-Cutting

For high-volume production and thin materials, rotary die-cutting offers significant economic advantages. This continuous process enables fast and cost-effective production of large quantities while maintaining consistent quality.

Cutting Plotter

Large or custom components can be manufactured directly from digital design data. The cutting plotter has a working area of approximately 2,000 × 3,000 mm and is particularly well-suited for samples, prototypes, and one-off parts without tooling costs. 

die-cutSELECTION

Materials for technical stamped parts

 
Choosing the right material is crucial to the function, service life, and cost-effectiveness of a die-cut part. CMC works with customers to develop the optimal solution for each specific application. 

Commonly Used Materials
• Kapton® HN polyimide films
• Nomex® 410 aramid papers
• Mylar® A polyester films
• Hostaphan® RN polyester films
• EPDM foams
• Crepe paper adhesive tapes
• PTFE films
• Polycarbonate films
• Self-adhesive glass fabrics
• Teonex® films
• High-performance PPS, PEI, PES, and PEEK films
• FEP films
• Acetate silk fabrics
• Multilayer laminates
• Other specialty technical films and composite materials  

Many die-cut parts are designed to be self-adhesive. To achieve this, CMC uses a variety of industrially proven adhesive systems that can be customized depending on the application. This makes it possible, for example, to produce paint protection parts that can be removed without leaving residue, as well as high-temperature-resistant insulation solutions.

 Adhesive Systems Used
• Synthetic rubber adhesives
• Acrylate adhesives
• Polysiloxane adhesives
• Heat-seal adhesives
• Laminating adhesives
• Hot-melt adhesives
• Hybrid adhesives
• Custom adhesive formulations

From Concept to Finished Die-cut Part

Every die-cut part begins with a technical requirement. We work with our customers to define the necessary material properties, loads, tolerances, contours, and processing requirements. Based on this, we develop a customized solution in which material selection, design, and manufacturing are optimally coordinated.

Through a combination of material expertise, manufacturing experience, and modern production processes, we create high-quality stamped parts for numerous applications, such as seals, insulation, protective covers, EMC shielding, or functional components in technical products.

Rapid Prototyping and Sample Die-cut Parts

Using modern flatbed plotters, high-precision samples and prototypes can be produced in a very short time. The maximum component size is up to 2,270 × 3,200 mm. Accuracies of up to ±0.1 mm and material thicknesses of up to 10 mm are possible.

Since virtually all common technical films, fabrics, and laminates can be processed, different materials can be compared with one another and tested under real-world conditions as early as the development phase. The samples already meet the quality standards of the eventual production run and can be adjusted at any time in terms of contour and material. 

Custom Solutions & Custom-Made Products

If no standard product meets your needs, we’ll work with you to develop a custom solution:

• Custom adhesive tapes
• Die-cut parts based on drawings
• Special material combinations
• Custom widths and shapes

    Request a Custom Solution Now

    BENEFITS

    Why Choose CMC Adhesive Technology?

    CMC Klebetechnik stands for diversity, precision, and true development expertise. With over 200 product types, the company offers solutions for virtually any technical application. Thanks to in-house development, it creates custom adhesive tapes and functional films that are precisely tailored to specific requirements. Precise manufacturing enables roll widths ranging from 0.8 mm to 1,000 mm - perfect for mass production, custom formats, and demanding industries.
    With decades of experience in electrical engineering, the automotive industry, mechanical engineering, energy, and many other sectors, CMC Klebetechnik delivers reliable results of the highest standard. And it’s all Made in Germany - for quality, technical precision, and maximum reliability.

    Over 60 years of experience

    Cross-Industry Expertise

    In-house coating facilities

    Rapid Sample & Prototype Production

    Sustainable, Responsible Production

    Made in Germany

    FAQ

    Questions & Answers

    What materials can be cut using CMC adhesive technology?

    CMC processes a wide range of web-like materials, such as papers, films, and nonwovens. The company has many years of experience with standard materials such as polyester films, Kapton® films, glass fabrics, and Nomex papers.

    What cutting techniques are used?

    Depending on the material, roll length, cutting width, and quantity, different cutting methods are used – including roll cutting, sheet cutting, and cross-cutting. Each technique is suited to specific requirements and material properties.

    What is meant by "format cutting"?

    In format cutting, roll stock is cut across the running direction to produce customer-specific sheet sizes. This process is ideal for preparing die-cut parts and labels. The maximum sheet size is 2,500 × 2,000 mm.

    What speeds can be reached?

    Depending on the product and requirements, coating speeds range from 0.5 m/min to 50 m/min.

    What is cross-cutting, and when is it used?

    In cross-cutting, log rolls are cut to the desired width using a knife that enters tangentially. This process offers a high degree of flexibility and is particularly well-suited for frequently changing customer orders.

    What cutting widths and tolerances are possible?
    • Cutting widths: 3 mm to 1,500 mm (in 0.1-mm increments)
    • Standard tolerance: ±0.2 mm
    • Roll lengths: 5 m to 2,500 m
    • Material thicknesses: 0.012 mm to approx. 0.5 mm; up to 3 mm depending on the material
    Can we process materials provided by the customer?

    Yes. Customers can provide their own films or materials. We recommend performing a test cut beforehand to ensure optimal results.

    Does CMC also offer laminating services?

    Yes. Materials can be laminated during or before cutting. The laminators used are specifically designed for very thin films in the single-micrometer range and produce warp-free laminates.

    CMC Klebetechnik

    Rudolf-Diesel-Straße 4
    67227 Frankenthal

    Open

    Monday through Friday
    8 a.m. – 6 p.m.

    Phone

    06233 872 300

    Email

    info@cmc.de