Precision, Stability, and Efficiency for Fuel Cells and Electrolyzers
The membrane-electrode assembly (MEA) is the heart of PEM fuel cells, PEM electrolysers, and redox flow batteries. Both the exchange of electrical charge and the chemical conversion take place within this smallest functional unit. For this technology to scale economically, MEAs must be produced reliably, be leak-tight, and, above all, be manufactured in large quantities.
CMC Klebetechnik develops specialized adhesive tapes for this purpose that significantly improve both operational reliability and production speed.
Why Tightness and Stability Are So Crucial
During operation, media such as oxygen and hydrogen must be reliably separated from one another. Even the smallest leaks can lead to:
• reduced performance
• malfunctions
• or even failure of the entire stack.
At the same time, the industry relies on the ability to manufacture MEAs quickly, precisely, and cost-effectively. This is exactly where CMC Klebetechnik’s solutions come into play.
Subgasket Seals: Stabilizing and Sealing the MEA
So-called Subgasket seals are used for mechanical stabilization outside the active area. CMC offers the specially developed CMC 61145 for this purpose – a laminated adhesive tape that has been optimized for this application.
CMC 61145 – Features & Benefits
- Carrier film: thin Kaladex® or Teonex® PEN film
- Adhesive: hydrolysis-stable specialty PSA adhesive
- No effect on the catalysts – no “poisoning” of the coating—no increase in the conductivity of the coolant
- Permanently elastic seal between the membrane (e.g., Nafion®) and the frame
- Extremely low thickness → compact stack
- High pressure resistance
- Simple process control during production
Available film thicknesses: Standard: 25 µm; Optional: 50 µm and 100 µm
Alternative polymers for higher hydrolysis stability: PPS, PFA, PPSU, PEEK
Since CMC is a manufacturer itself, the adhesive layer can be precisely adapted to the thickness of the electrodes (GDL, MPL, CCM).
Manufacturing aid for the roll-to-roll process
The roll-to-roll method is ideal for mass production – a continuous process that enables high production volumes.
However, after the media openings are die-cut, the PEN film of the CMC 61145 becomes very unstable. To ensure it can still be laminated with precision, the CMC 12089 is used.
CMC 12089 – The Durable Laminating Guide Film
- Relatively thick polyester film (also available in 50 µm)
- Is laminated with the PEN film prior to the die-cutting process
- Is not completely cut through during die-cutting (kiss-cut)
- Serves as a stable backing for the roll-to-roll process
- Enables precise lamination between Subgasket films and the membrane
- No stretching due to tensile forces during the hot lamination process
- Removable without leaving residue thanks to a special adhesive
This enables the transition from the slow “stacking process” to high-precision, fast roll-to-roll lamination.
Expanded Capabilities
In some designs, it makes sense to use a double-sided coated Subgasket frame:
• one side seals against the functional membrane
• the other side (e.g., silicone) seals against the bipolar plate or GDL
Conclusion: High-Precision Adhesive Tapes for Modern Energy Technology
The CMC 61145 and CMC 12089 products are key components for the modern, fast, and cost-effective mass production of:
• PEM fuel cells
• PEM electrolysers
• Redox flow batteries
They increase operational reliability, improve process stability, and enable high production speeds.