How Carrier Films Stabilize the Roll-to-Roll Process
The manufacture of modern fuel cells faces a key challenge: producing MEA units quickly, precisely, and cost-effectively. The roll-to-roll process, in particular, offers enormous potential for cost savings – but only if the materials used are stable enough to meet the high mechanical requirements.
CMC Klebetechnik demonstrates how specially developed carrier films reliably support the process and significantly simplify production.
Why roll-to-roll?
It is well known in film processing – such as in the packaging industry—that the continuous roll-to-roll process is significantly faster than intermittent processes. For MEA production, this means:
• higher output
• lower costs
• consistent, reproducible quality
For this process to work, the subgasket seals must be supplied as continuous material.
The MEA – Structure and Requirements
The membrane-electrode assembly consists of:
• an ion-conducting membrane (e.g., Nafion®)
• catalyst coatings on both sides
• a circumferential subgasket seal (e.g., PEN or PPS)
This seal fulfills two key functions:
• Fluid sealing → prevents hydrogen/oxygen crossover
• Electrical insulation → separates the anode and cathode sides
For the roll-to-roll process, the Subgasket films are fed from above and below to the pre-punched membrane to form a frame.
The problem: warping caused by large cutouts on the inside
Subgasket films have large internal cutouts into which the membrane is later laminated. As a result, the material web loses:
• its inherent strength
• its dimensional stability
• its process reliability
Narrow material webs can warp or distort during transport – making precise lamination impossible.
Ideal for modern electronics manufacturing
CMC 39504 can be integrated directly into the cable lamination process. This saves time, reduces the number of process steps, and enables seamless shielding without any additional steps.
Lösungsansätze: Fixierung oder Trägerband
1. Tractor Punching (Sprocket Feed)
Mechanical fixation via perforations keeps the film in shape. → Technically possible, but not always optimal.
2. Carrying strap – the most reliable method
Here, the Subgasket film is laminated onto a low-tack polyester carrier film.
Advantages:
• Stable material web despite large cutouts
• No warping during transport
• Precise lamination with the membrane
• Carrier film can be removed before or after lamination (DECAL process)
Here’s how the process works
1. Subgasket material (PEN, PPS, etc.) is laminated onto the backing film.
2. Openings for media inlets and the large membrane opening are punched out.
3. The stabilized frame film is fed into the roll laminator.
4. The membrane is precisely laminated between the two frame films.
5. The backing film is removed.
The result: a stable, fast, and reliable roll-to-roll process.
Support from CMC Klebetechnik
CMC offers suitable adhesive films with:
• low elongation
• high temperature resistance
• optimal adhesive strength for the process
In addition, compatible materials are available:
• PEN films / PEN adhesive tapes
• Kapton® films / Kapton® adhesive tapes
Data sheets: CMC 61325 / CMC 61145
Conclusion: Stability for MEA Mass Production
With the right carrier tape, an unstable frame film becomes a material that can be guided with precision and offers process reliability – which is what makes the roll-to-roll process possible in the first place. This allows fuel cells to be manufactured faster, more cost-effectively, and to a high standard of quality.
