06233 872 300 info@cmc.de

Why They Are Indispensable in Electric Vehicles

Wherever high electrical power is required in an electric vehicle, high currents flow – and this generates heat. Cables must be reliably insulated, especially between the high-voltage battery, the inverter, and the electric axle. This is where high-current strands and polyimide adhesive tapes come into play.

Why High-Current Strands Are Necessary at All

At high alternating currents, the skin effect occurs: The current increasingly shifts toward the conductor’s surface, causing the usable cross-sectional area to shrink. Resistance increases – and the conductor heats up more.

The solution: A large conductor cross-section is divided into many fine, individually enamel-insulated wires. These so-called stranded conductors are twisted and plaited – similar to a rope. In this state, however, they do not yet have any outer insulation.

This outer insulation is crucial, especially for high-current stranded conductors, because:
• temperatures can become extremely high
• in the event of a fault, short-term peaks exceeding 300°C occur
• mechanical stresses and vibrations act continuously on the conductor

Polyimide Adhesive Tapes – The Ideal Insulation

Polyimide films (e.g., Kapton®) offer an exceptionally high performance margin. They are:

1. Extremely temperature-stable

Even when exposed briefly to temperatures well above 300°C, their insulating properties remain intact.

2. Highly electrically insulating

They reliably protect wires from short circuits and provide mechanical protection.

3. Secured with a self-adhesive coating

CMC’s adhesive layer ensures that the film layers do not shift – neither during installation nor during operation.

4. Chemical-resistant

Oils, solvents, and automotive chemicals have little effect on polyimide.

5. Thin & flexible

The advantages of the strands – flexibility and tensile strength – are fully preserved.

6. Naturally flame-retardant

No halogen-containing flame retardants are required.

7. Environmentally friendly disposal

Polyimide films do not produce any hazardous waste products.

8. UL-listed

Kapton® adhesive tapes undergo regular quality control by Underwriter Laboratories.

Why this is so important in electric vehicles

High-current strands insulated with polyimide adhesive tape make a crucial contribution to the safety and efficiency of the powertrain:

• Minimized fire risk
• Long service life of the insulation
• Compact design due to thin film thickness
• Reliable performance even under extreme conditions

For manufacturers with the highest standards for safety and reliability, polyimide adhesive tapes are therefore the top choice.